Study of the gas-phase parameters affecting the silicon-oxide film deposition induced by an ArF laser

A study of the gas-phase parameters involved in ArF laser induced chemical vapour deposition of silicon-oxide thin films is presented. A complete set of experiments has been performed showing the influence of the concentration of the precursor gases, N₂O and SiH₄, and their influence on total and partial pressures on film growth and properties. In this paper we demonstrate the ability of this LCVD method to deposit silicon oxide films of different compositions and densities by appropriate control of gas composition and total pressure. Moreover, a material specific calibration plot comprising data obtained using different preparation techniques is presented, allowing determination of the stoichiometry of SiO _x films by using FTIR spectroscopy independently of the deposition method. For the range of processing conditions examined, the experimental results suggest that chemical processes governing deposition take place mainly in the gas phase.     

Molecular dynamics simulations of the oligonucleotide with the modified phosphate/phosphonate internucleotide linkage

Impact of the internucleotide linkage modification by inserting a methylene group to the P-O bond (—O—PO ₂ ^— —O— chain changed for —O—PO ₂ ^— —CH₂—O—), on the modified oligonucleotide binding ability to the natural DNA strand was studied by molecular dynamics simulation. Complex of (dT)₁₁ with a deoxyadenosine undecamer containing alternating modified and natural internucleotide linkage was studied as a model system. The Amber force field was completed by a set of new parameters needed to model the modified part of the nucleotide. The simulations confirmed existence of a double-helical complex the melting point of which is considerably higher than 300 K. While the thymidine (unmodified) strand possesses a B-type secondary structure, the conformation of the adenosine (modified) strand is not stable at 300 K. The -ggt conformation of the modified linkages is highly preferred, temporary jumps to the -g-gt and ggt conformations were, however, observed.     

Infinite dimensional quadratic forms admitting composition

Composition algebras with a unit element constitute a well-known class of algebras. In this paper, those composition algebras with a one-sided unit element are characterized and examples are given of arbitrary infinite dimension.

     

A branching process model for sand avalanches

An analytically solvable model for sand avalanches of noninteracting grains of sand, based on the Chapman-Kolmogorov equations, is presented. For a single avalanche, distributions of lifetimes, sizes of overflows and avalanches, and correlation functions are calculated. Some of these are exponentials, some are power laws. Spatially homogeneous distributions of avalanches are also studied. Computer simulations of avalanches of interacting grains of sand are compared to the solutions to the Chapman-Kolmogorov equations. We find that within the range of parameters explored in the simulation, the approximation of noninteracting grains of sand is a good one.     

XPS and XAES study of the interaction of palladium and copper overlayers with fullerene films

X-ray photoelectron and Auger spectroscopies were used to examine surface bonding and overlayer growth during palladium and copper deposition onto films of fullerene, C₆₀ The results were consistent with metal cluster formation on C₆₀. The observed positive core electron binding energy shifts in small metallic clusters supported on C₆₀ were shown to originate in metal-fullerene interaction accompanied by charge transfer. Palladium-fullerene intermixing at temperatures as low as ss 50°C was observed for small Pd coverages.     

Aqueous solution and solid state interactions of lanthanide ions with a methacrylic ester polymer bearing pendant 15‐crown‐5 moieties

The interaction between trivalent lanthanide ions and poly(1,4,7,10,13‐pentaoxacyclopentadecan‐2‐yl‐methyl methacrylate), PCR5, in aqueous solution and in the solid state have been studied. In aqueous solution, evidence of a weak interaction between the lanthanides and PCR5 comes from the small red shift of the Ce(III) emission spectra and the slight broadening of the Gd(III) EPR spectra. From the Tb(III) lifetimes in the presence of H₂O and D₂O the loss of one or two water coordinated molecules is confirmed when Tb(III) is bound to PCR5. An association constant of the order of 200 M^?1 was obtained for a 1:1 (lanthanide:15‐crown‐5) complex from the shift of the polymer NMR signals induced by Tb(III). A similar association constant is obtained from the differences of the molar conductivity of Ce(III) solution at various concentrations in presence and absence of PCR5. When Tb(III) is adsorbed on PCR5 membranes, lifetime experiments in H₂O and D₂O confirm the loss of 5 or 6 water coordinated molecules indicating that in solid state the lanthanide(III)‐PCR5 interaction is stronger than in solution. The adsorption of Ce(III) in PCR5 membranes shows a Langmuir type isotherm, from which an equilibrium constant of 39 M^?1 has been calculated. SEM shows that the membrane morphology is not much affected by lanthanide adsorption. Support for lanthanide ion–crown interactions comes from ab initio calculations on 15‐crown‐5/La(III) complex. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1788–1799, 2007     

Efficiency and effectiveness of Spanish football teams: a three-stage-DEA approach

In this paper, we apply a three-stage-DEA model to the Spanish Professional Football League, which means separating the teams’ economic behaviour into three components: operating efficiency—of the offence and defence—athletic or operating effectiveness, and social effectiveness. The results showed that the technical inefficiency of the defence is greater than that of the offence, both being caused by aspects linked to the poor management of players’ abilities and by the football team’s size. Teams showed a favourable evolution of their offensive and defensive efficiency during the 2004/2005 season and to a lesser extent in the season before. The point system assigned by the professional football league regulations evaluates the teams’ athletic effectiveness, but we detected that the teams with the most experience perform athletically in a more effective manner. Their social effectiveness is strongly related to the level of play in itself and to factors linked to their PFL ranking: participation in international competitions for important football teams; or the struggle of minor football teams to stay in the first division.     

Diblock copolymers based on allyl methacrylate: Synthesis,characterization, and chemical modification

Different diblock copolymers constituted by one segment of a monomer supporting a reactive functional group, like allyl methacrylate (AMA), were synthesized by atom transfer radical polymerization (ATRP). Bromo‐terminated polymers, like polystyrene (PS), poly(methyl methacrylate) (PMMA), and poly(butyl acrylate) (PBA) were employed as macroinitiators to form the other blocks. Copolymerizations were carried out using copper chloride with N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) as the catalyst system in benzonitrile solution at 70 °C. At the early stage, the ATRP copolymerizations yielded well‐defined linear block copolymers. However, with the polymerization progress a change in the macromolecular architecture takes place due to the secondary reactions caused by the allylic groups, passing to a branched and/or star‐shaped structure until finally yielding gel at monomer conversion around 40% or higher. The block copolymers were characterized by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, and differential scanning calorimetry (DSC). In addition, one of these copolymers, specifically P(BA‐b‐AMA), was satisfactorily modified through osmylation reaction to obtain the subsequent amphiphilic diblock copolymer of P(BA‐b‐DHPMA), where DHPMA is 2,3‐dihydroxypropyl methacrylate; demonstrating the feasibility of side‐chain modification of the functional obtained copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3538–3549, 2007     

Mineralogical analysis of auriferous ores from the El Diamante mine, Colombia

X-ray diffraction (XRD), Mössbauer spectrometry (MS), secondary ions mass spectroscopy (SIMS) and laser-ablation microprobe–inductively coupled plasma–mass spectrometry (LAM–ICP–MS) were used to study mineral samples of Colombian auriferous ores collected from the “El Diamante” mine, located in the municipality of Guachavez-Nariño, in Colombia. The samples were prepared as polished thin sections and polished sections. From XRD data, quartz, sphalerite and pyrite were detected and their respective cell parameters were estimated. From MS analyses, pyrite, arsenopyrite and chalcopyrite were identified; their respective hyperfine parameters and respective texture were deduced. Multiple regions of approximately 200 × 200 μm in each sample were analyzed with SIMS; the occurrence of “invisible gold” associated mainly with pyrite and secondarily with arsenopyrite could thus be assigned. It was also found that pyrite is of the arsenious type. Spots from 30 to 40 μm in diameter were analyzed with LAM–ICP–MS for pyrite, arsenopyrite and sphalerite; Au is “homogeneously” distributed inside the structure of the arsenious pyrite and the arsenopyrite (not as inclusions); the chemical composition indicates similarities of this “invisible gold”, forming a solid solution with arsenious pyrite and arsenopyrite. One hundred nineteen and 62 ppm of ‘invisible gold’ was quantified in 21 spots analyzed on pyrite and in 14 spots on arsenopyrite, respectively.